Gm-731-a lamp.giar. (ob)ce -it
20mt slpitter extension

Laf.i12-600s. start 600w ce

€70.43
Tax included
MARCUCCI
33800210
New
2 Items
Last items in stock
Quantity
Add to Wishlist

This product can be bought with COD
Home , Latest arrivals
Lafayette Inverter , i12-600S.START , 12V/220V-600W , Current Transformers , Consumer Electronics
  • Security policies
    Security policies
  • Shipping Policies
    Shipping Policies

Lafayette i12-600S.START
INVERTER 12V/220V-600W

Inverters are devices that convert a direct current voltage coming from a 12/24 battery into an "alternating" voltage with a square waveform or a modified sine wave.
The major problem in the operation of an inverter is to be able to generate an output current adequate for the type of load connected to it.


If a purely resistive load is connected to an inverter , i.e. incandescent lamps, electric stoves, etc., the only factor to keep under control is the power in W or VA that the inverter is able to generate at full capacity.
In the event of an overload, the inverter automatically switches itself off and enters protection mode.
Thanks to the new Soft-Start technology used by the latest generation of inverters, the internal circuit of the inverter checks the load connected to it before supplying output voltage, and only if the required power and the type of load are adequate is the 220V AC output enabled.
This control operation takes about 10 seconds, after which the output voltage is increased according to a ramp graph from 0V to 220V in a rapid manner, in this way current inrushes that could cause damage to the inverter and electrical disturbances on the line are avoided.
Soft-Start technology is essential when used with inductive loads (refrigerators, electric tools or electric motors in general) which require a high current at start-up.

 

TECHNICAL SPECIFICATIONS

DC Input: 10~15VDC
Continuous output power: 600W
Peak Output Power: 1500W
Low battery alarm: 10.5V ±0.5V
Minimum battery voltage: 10V ±0.5V
Maximum battery voltage: 15.5V ±0.5V
Overload protection: YES
No-load current:
Alarm and thermal fuse intervention: 60°C ±5°C
DC input fuse: 2 x 40A
Dimensions: 242 x 91 x 58 mm
Weight: 1.7 Kg.

 

Device compliant with Automotive Directive 72/245/EEC amended by 95/54/EC

MARCUCCI
MCC33800210
2 Items
New

No comment at this time.

You Must Login To Review