Ideallux Cable 2x1.5 fror extension 300mm

The Ideallux 2x1.5 FROR Extension Cable 300mm is an extension cable designed for electrical applications where an extension of the connection is required. This type of cable is commonly used for lighting installations, such as connecting lamps or luminaires, in domestic or commercial environments.

Product Details:

• Brand : Ideallux
• Cable Type : FROR (flexible cable for electrical systems)
• Conductor Configuration : 2x1.5 mm²
• Extension Length : 300mm (30cm)
• Use : Extension cord for electrical connections

Main Features:

1. Cable Type - FROR :

   • FROR is a flexible electrical cable with special rubber insulation, designed to withstand particular conditions such as exposure to heat, chemicals or humid environments. This type of cable is ideal for applications that require a resistant and safe cable.

2. Conductor Configuration :

   • 2x1.5 mm² : Indicates that the cable has two internal conductors (wires), each with a cross-section of 1.5 mm². This configuration is standard for many lighting and small electrical equipment applications, and is suitable for current loads up to approximately 16 amperes (depending on local specifications and type of use).

3. Extension Length :

   • 300mm (30cm) : This is a relatively short extension lead, designed for close-coupled connections, such as extensions between components within light fixtures or for short connections where a long cable is not necessary.

4. Main Use :

   • Lighting and Internal Connections : Ideal for internal connections in lighting fixtures, lamps, or for short extensions where a safe and secure connection is required. This cable can be used to extend or connect electrical components within lighting fixtures or other low voltage applications.

Common Applications:

• Lighting Installations : Perfect for connecting lighting fixtures such as ceiling lights, wall lights, pendant lights, or other indoor lamps.
• Electrical Connection Extensions : Used to extend the connection between electrical components, such as transformers, LED drivers, or terminal blocks.
• Indoor Connections : Ideal for indoor use in dry or slightly humid environments, thanks to the flexibility and resistance of the FROR cable.

Benefits of Using this Cable:

• Flexibility and Resistance : FROR cable is designed to be flexible and resistant, allowing for easy installation even in tight spaces or difficult corners.
• Safety : Complies with safety standards for electrical applications, reducing the risk of short circuits, overheating, or mechanical damage.
• Compatibility : Suitable for a wide range of lighting fixtures and light electrical applications.

Installation:

1. Turn Off the Power Supply : Before starting any installation or wiring work, be sure to turn off the power supply to avoid the risk of electric shock.

2. Prepare the Cable :

   • Carefully cut the outer sheath of the cable to expose the internal conductors (making sure not to damage the insulation of the conductors themselves).
   • Strip insulation from the internal conductors to the length necessary, usually a few millimeters, to make contact with the connection terminal.

3. Connect the Cable :

   • Connect the cable conductors to the connection terminals or terminals of the lighting fixture or device to be connected, always respecting the correct polarity (phase and neutral).

4. Test the Connection :

   • Once the connection is complete, turn the power back on and verify that the connection works properly.

Safety Notes:

• Maximum Power Control : Make sure the cable is rated for the current load required for the specific application. Improper use may cause overheating or damage to the installation.
• Indoor Use : This cable is designed for indoor use. It should not be used outdoors or in areas exposed to high humidity without adequate protection.